EDM Model


More Information About Agie Charmilles:


Agie Charmilles CUT 1000
Ultra precision Wire Cut EDM

PRODUCT
Agie Charmilles CUT 1000 and CUT 1000 Oiltech EDM

Agie Charmilles CUT 1000

The Ultimate in Precision

The CUT 1000+F and 1000 Oiltech models are the result of careful review of the requirements of our most discriminating customers. Engineered from the ground up for maximum accuracy, the CUT 1000 incorporates compact monoblock construction, vibration dampening, robust components, wire guides close to the workzone, separation of the X and Y Axis, and patented thermal control of all sources of heat. With fine wire (+F) capacity down to .0008", the machine is in a class all it's own when the finest accuracies using the finest wires are required. The OilTech version uses dielectric oil to prevent corrosion during long erosion conditions, thus providing the best surface integrity with no electrolysis effect.

       

SPECS

CUT 1000

Ultra precision Wire Cut EDM
Machine Type: CNC Wire
Frame Type: Bridge
Submersible: Standard
WORKING CAPACITY
Max. Part Size (L x D x H) in. 11.800 x 7.900 x 3.200
Max. Part Weight 77 lbs
WIRE DATA
Max Oper. Thickness

n/a

Max Taper Angle

3.0000°
Max Part Thickness at Max Taper Angle 3.150 in.

Min Hole Diameter

n/a

Max Wire Spool Weight 18.00 lbs

Max Wire Diameter

0.0080 in.
Features Auto rethreading: Standard
Auto restart after power out: Standard
Auto slug removal: Standard
Anti-electolysis power supply: Standard
Start hole device: Optional
AXES AND TRAVELS
Number of Axes: 5
Travel Rapid Rate Operation
X
8.700 in. Programmable
Y
6.300 in. Programmable
Z
3.900 in. Programmable
U ± 1.570 in. Programmable
V ± 1.570 in. Programmable
WEIGHTS AND MEASURES
Machine Length 78 in.
Machine Width 55 in.
Machine Height 75 in.
Machine Weight 7,040 lbs

Last Edited: 10/26/2010

CHANNEL PARTNERS
amt Modern Machine Shop Production Machining Moldmaking Technology

Debug Info

Model Properties: Type = EDM
CNCType 1
CNCStandard Vision 5
CNCOption
FrameType 2
TravelMode 3
SubmersibleType 1
FilteredParticleSize
MaximumPartLength 11.800
MaximumPartLengthOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartDepth 7.900
MaximumPartDepthOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartHeight 3.200
MaximumPartHeightOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartWeight 77
TableLength [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TableDepth [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankLength [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankDepth [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankHeight [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankCapacity [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TotalSystemCapacity [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumCuttingSpeed [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
OverallLength 78
OverallDepth 55
OverallHeight 75
Weight 7040
TableHeight [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TableToPlaten [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
NumberOfAxes 5
NumberOfAxesOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
NumberOfAxesOptionThree [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
NumberOfAxesOptionFour [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
XTravel 8.700
XTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
XRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
XAvailable 1
YTravel 6.300
YTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
YRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
YAvailable 1
ZTravel 3.900
ZTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
ZRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
ZAvailable 1
UTravel 1.570
UTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
URapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
UAvailable 1
VTravel 1.570
VTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
VRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
VAvailable 1
CTravel [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
CRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
CAvailable [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumOpThickness [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumOpThicknessOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumTaperAngle 3.0000
MaximumTaperAngleOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartThicknessAtMaxTaperAngle 3.150
MaximumPartThicknessAtMaxTaperAngleOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
AutoRethreading 1
AutoRestartAfterPowerOut 1
AutoSlugRemoval 1
AntiElectrolysisPowerSupply 1
Auto2ndCut [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
StartHoleDevice 2
MinimumHoleDiameter [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumWireDiameter 0.0080
MaximumWireWeight 18.00
MaximumWireWeightOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumElectrodeWeight [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumElectrodeWeightWhenUsingCAxis [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumElectrodeDiameter [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
OrbitalDevice [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
AutoElectrodeChanger [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
PowerSupplyMean [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
PowerSupplyPeak [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
GeneralProductionInformation
ModelStrengths1
ModelStrengths2
ModelStrengths3
Id a382a170-bbc0-498c-8398-8d4353fecf68
MachineTypeId a6c1a963-0c1e-4565-9ea1-3e005b9c139c
MachineType GPI.CRM.Models.MachineType
Name CUT 1000
Description Ultra precision Wire Cut EDM
ManufacturerId cca77e25-266a-467b-9391-8a7df76f3970
ReleaseDate 8/1/2010 12:00:00 AM
LastEdited 10/26/2010 3:33:35 PM
EditedBy !nsadmin
SelectParticipation True
IsModelHiddenOnline False
IsDeleted False
AdditionalInfoLink [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
ShowEditorialLink False
ImageLocation [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TechnicalNotes Agie Charmilles CUT 1000 and CUT 1000 Oiltech EDM

Agie Charmilles CUT 1000

The Ultimate in Precision

The CUT 1000+F and 1000 Oiltech models are the result of careful review of the requirements of our most discriminating customers. Engineered from the ground up for maximum accuracy, the CUT 1000 incorporates compact monoblock construction, vibration dampening, robust components, wire guides close to the workzone, separation of the X and Y Axis, and patented thermal control of all sources of heat. With fine wire (+F) capacity down to .0008", the machine is in a class all it's own when the finest accuracies using the finest wires are required. The OilTech version uses dielectric oil to prevent corrosion during long erosion conditions, thus providing the best surface integrity with no electrolysis effect.

       

TechspexId 1074
Manufacturer GPI.CRM.Models.Company
Links System.Collections.Generic.List`1[GPI.CRM.Models.Techspex.Link]