EDM Model


More Information About +GF+:


+GF+ CUT 2000
Ultra precision Wire Cut EDM

PRODUCT
Agie Charmilles CUT 2000 Wire EDM

Agie Charmilles CUT 2000

The Ultimate in Precision

The CUT 2000 model comes with "V" series IPG-V generator with modern design and technology that delivers a finer spark gap for better part geometry and surface finishes down to 0.05µm Ra in continuous operation. The CUT 2000 comes with the following AgieCharmilles exclusives: Windows XP-powered Vision 5 control, TECCUT, 3D SETUP, EASYWORK and much 

       

SPECS

CUT 2000

Ultra precision Wire Cut EDM
Machine Type: CNC Wire
Frame Type: "C"
Submersible: Standard
WORKING CAPACITY
Max. Part Size (L x D x H) in. 29.500 x 21.600 x 9.800
Max. Part Weight 992 lbs
Max. Cutting Speed 28.00 ipm
WIRE DATA
Max Oper. Thickness

n/a

Max Taper Angle

30.0000°
Max Part Thickness at Max Taper Angle 3.930 in.

Min Hole Diameter

n/a

Max Wire Spool Weight 55.00 lbs

Max Wire Diameter

0.0130 in.
Features Auto rethreading: Standard
Auto restart after power out: Standard
Auto slug removal: Standard
Anti-electolysis power supply: Standard
Start hole device: Optional
AXES AND TRAVELS
Number of Axes: 5
Travel Rapid Rate Operation
X
13.770 in. Programmable
Y
9.840 in. Programmable
Z
10.000 in. Programmable
U ± 2.700 in. Programmable
V ± 2.700 in. Programmable
WEIGHTS AND MEASURES
Machine Length 83 in.
Machine Width 77 in.
Machine Height 88 in.
Machine Weight 7,940 lbs

Last Edited: 01/31/2012

CHANNEL PARTNERS
amt Modern Machine Shop Production Machining Moldmaking Technology

Debug Info

Model Properties: Type = EDM
CNCType 1
CNCStandard Vision 5
CNCOption
FrameType 1
TravelMode 3
SubmersibleType 1
FilteredParticleSize
MaximumPartLength 29.500
MaximumPartLengthOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartDepth 21.600
MaximumPartDepthOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartHeight 9.800
MaximumPartHeightOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartWeight 992
TableLength [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TableDepth [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankLength [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankDepth [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankHeight [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
WorkTankCapacity [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TotalSystemCapacity [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumCuttingSpeed 28.00
OverallLength 83
OverallDepth 77
OverallHeight 88
Weight 7940
TableHeight [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TableToPlaten [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
NumberOfAxes 5
NumberOfAxesOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
NumberOfAxesOptionThree [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
NumberOfAxesOptionFour [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
XTravel 13.770
XTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
XRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
XAvailable 1
YTravel 9.840
YTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
YRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
YAvailable 1
ZTravel 10.000
ZTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
ZRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
ZAvailable 1
UTravel 2.700
UTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
URapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
UAvailable 1
VTravel 2.700
VTravelOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
VRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
VAvailable 1
CTravel [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
CRapid [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
CAvailable [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumOpThickness [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumOpThicknessOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumTaperAngle 30.0000
MaximumTaperAngleOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumPartThicknessAtMaxTaperAngle 3.930
MaximumPartThicknessAtMaxTaperAngleOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
AutoRethreading 1
AutoRestartAfterPowerOut 1
AutoSlugRemoval 1
AntiElectrolysisPowerSupply 1
Auto2ndCut [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
StartHoleDevice 2
MinimumHoleDiameter [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumWireDiameter 0.0130
MaximumWireWeight 55.00
MaximumWireWeightOptionTwo [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumElectrodeWeight [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumElectrodeWeightWhenUsingCAxis [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
MaximumElectrodeDiameter [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
OrbitalDevice [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
AutoElectrodeChanger [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
PowerSupplyMean [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
PowerSupplyPeak [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
GeneralProductionInformation
ModelStrengths1
ModelStrengths2
ModelStrengths3
Id e2a456a0-33ad-4d6b-87b2-8a01f9bde628
MachineTypeId a6c1a963-0c1e-4565-9ea1-3e005b9c139c
MachineType GPI.CRM.Models.MachineType
Name CUT 2000
Description Ultra precision Wire Cut EDM
ManufacturerId cca77e25-266a-467b-9391-8a7df76f3970
ReleaseDate 1/1/2011 12:00:00 AM
LastEdited 1/31/2012 11:18:24 AM
EditedBy !nsadmin
SelectParticipation True
IsModelHiddenOnline False
IsDeleted False
AdditionalInfoLink [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
ShowEditorialLink False
ImageLocation [ERROR] There was a problem getting this value.
Error Message: Object reference not set to an instance of an object.
TechnicalNotes Agie Charmilles CUT 2000 Wire EDM

Agie Charmilles CUT 2000

The Ultimate in Precision

The CUT 2000 model comes with "V" series IPG-V generator with modern design and technology that delivers a finer spark gap for better part geometry and surface finishes down to 0.05µm Ra in continuous operation. The CUT 2000 comes with the following AgieCharmilles exclusives: Windows XP-powered Vision 5 control, TECCUT, 3D SETUP, EASYWORK and much 

       

TechspexId 1097
Manufacturer GPI.CRM.Models.Company
Links System.Collections.Generic.List`1[GPI.CRM.Models.Techspex.Link]